Marble Floors Cleaning And Maintenance Tips

Marble is one of the most graceful of all-natural stones, with its beauty, exclusivity, and luxury. Marble tile is a very stylish option for the floor, countertops, and wall of kitchens, living spaces, and bathrooms. But clients are often unsure about the suitability of marble in bathrooms due to its porous features.

The porous character of a marble surface allows liquids to be absorbed quickly cause the marble floor looks old and dirty. To avoid these issues it needs to be properly sealed and maintained.

As a homeowner interested in how to clean marble floors in your residence, keep reading us for all the tips marble cleaning and maintenance you’ll need, from routine care to stain removal.

Treat stains as soon as you see them.

If you wait longer, the harder it may be to remove them from the surface. If something spills on the marble floor, blot it up immediately with a soft cloth, not to spread the stain by wiping or smearing it. Flush the spot with water and mild soap, then rinse with more water.

Depend on the degree of traffic the stone surface gets you can decide how often your marble tile floors will need stone professionally serviced.

As a general rule of thumb, once a year for general maintenance of professional marble cleaning and sealing will help prevent permanent stains. Full marble restoration includes Diamond grinding to remove scratches, stains, and etch marks that are needed when you see visible issues with your stone, such as etching, wear patterns, scratches, or an uneven finish. In the average home, the full restoration process is needed approximately every 3-5 years if the stone is properly maintained.

Stay away from harsh cleaners.

Marble is extremely sensitive to anything acidic. Using acidic cleaners such as those containing vinegar on marble floors will create dull spots called etching. Abrasive cleaning materials like scouring powders or creams, dry or soft cleansers, and bathroom, grout, and tub and tile cleaners should be avoided as well. Even a cleaner formulated for granite will be too severe.

Avoid the use of vinegar, bleach, glass cleaners, ammonia, or other so-called Multi-Surface cleaners.

Its better always test in a small, area before using any of the methods for how to clean marble floors recommended below.

Clean marble floors frequently and keep away from dirt and grit is apparent with a clean dust mop. A good rule of thumb to determine frequency is to dust mop once weekly per person living in the home.

Some marble contains iron oxide, and water may bring it up to the surface and leave behind rust stains. Most stains that occur in a stone surface can be removed. Knowledge of the correct process, stain specific chemicals, and application are very important and can be the difference between removing the stain and setting it permanently. There is not one chemical to remove all stains.

Placemats or rugs around entrances.

These coverings will help restrict the amount of abrasive dirt that’s being tracked into your home from outside and damaging marble tile floors.

Use a soapless cleaner with a neutral pH (pH7) if possible, which will minimize streaks left behind. You can also use a mild, dishwashing detergent or stone soap specifically formulated for marble tile floors.

When you start the marble cleaning routine, first wet the stone’s surface with clean water. You can use a spray bottle to avoid soaking the floor. Then apply the marble cleaning solution according to the instructions with a soft mop. Rinse the surface afterward with clean water. Do not forget to change out the water with fresh as needed and dry the surface with a soft cloth. Drying the marble floors is an important step after every cleaning or spot treatment.

Important Marble Cleaning Facts